Instala??o F��cil da Tampa Tonneau Sem Furos para a Picape BYD Shark |

Pre-Install Prep (Check seu Parts First!)

Unbox o tonneau cover kit e lay everything out para avoid missing bits:

Main Kit: Main shell (com roller), left/right rails, rain cover, weatherstripping
Fixings: personalizado no-drill brackets, trapezoid screws, clips, impermeável nuts
Tools: Socket wrench, Phillips screwdriver, spirit level (MUST have!), sealant (optional but recommended para extra water resistance)

Pro Tip: Sort seu screws e brackets into piles — no more hunting around!

🔧 Step 1: Pre-Assemble Rails & Shell (Crítico!)

Peel o protective film off o shell, remove o protective wooden strips em either side, e slot o left/right rails into o shell. Line para cima o grooves e alignment holes perfectly.
Pro Move: Don’t tighten o screws yet — leave um bit de play para fine-tuning later para avoid misalignment.
Insert o roller slats: Slide one end de o slats into o rails, smooth them along o track — no kinks allowed!

Aussie Note: Make sure o metal sliders inside o rails line para cima com o alignment holes

🛡️ Step 2: Seal It para cima (Waterproofing Core!)

Attach o drain hoses para both ends de o shell — push them all o way em para prevent leaks.
Run um bead de sealant along o inner edge de o rails, especially where o rails meet o shell. este locks out o rain!
If seu picape has pre-cut rubber strip slots, stick o included weatherstripping em place para fill gaps.

Pro Tip: Use o right-length drain hoses e line para cima o bottom drainage holes exactly

🚚 Step 3: Mount & Central (Level é Key!)

Teamwork Alert: Obtenha um mate para help lift o pre-assembled cover into o tub. Central it — make sure o gap between o cover e tub é even left/right e front/back.
Use o spirit level para check it’s straight — no tilting! Slide it forward para sit contra o original carro stops.
Lock it into position once you’re happy com o spot.

Aussie estilo: Take care not para arranhão o paint! Check o even gaps

Step 4: Fix Brackets (No-Drill Heartbeat!)

Grab o personalizado brackets, slot them into o inner tub rails, e line them para cima com o factory holes EXACTLY — not um single drill bit needed!
Secure o brackets com o original carro screws — 2 per bracket minimum para strength.
Slide o trapezoid screws into o rail grooves (3 per side) e fasten them loosely.

Aussie Note: Perfect bracket alignment = no wobble

✅ Step 5: Fine-Tune & acabamento Up

Adjust o rails: Mantenha o front width even; make o rear 1-2mm narrower para avoid o lock catching.
Tighten all screws: Start com brackets, then lock o rails para o shell. Don’t over-tighten — you’ll strip o threads!
Fit o rain cover: Slide it into o shell (check o correct orientation!), trim o rubber strips flush, e seal o ends.
Install o lock: Clip o lock onto o cover e tailgate — make sure it closes smoothly.

Pro Tip: Press o rubber strips down firmly para um tight seal!

⚠️ Aussie-estilo Tips & Final Check

Golden Rules: No drilling, no cutting, no modifying o original carro! Tighten screws em stages; never skip sealant/weatherstripping.
Test It Out:
- Slide o cover open/closed 5+ vezes — smooth action, no jitters!
- Close o tailgate — lock holds tight, no wobble.
- Hose it down — check para leaks, drain hoses should work perfectly.

💡 Wrap-Up

This BYD Shark tonneau cover é custom-molded para um encaixe perfeito. No need para pay um Compre — do it yourself, save cash, e Melhore seu picape! Great para weather proteção, security, e camping/hauling gear.

Click para purchase more BYD Shark 6 Accessories

0 comentários

Impressão

Related Instalação e faça você mesmo

Cart

Home

Shopping

Wishlist

Account

Call Us: (012)-345-67890

Email: support@domain.com